Skip to content
Compliance

CRA - Cyber Resilience Act

An EU regulation imposing cybersecurity requirements on products with digital elements placed on the European market.

What is the Cyber Resilience Act?

CRA (Cyber Resilience Act) is a European Union regulation introducing mandatory cybersecurity requirements for products with digital elements - both hardware and software - made available on the EU market. CRA complements NIS2 and DORA with requirements for the products themselves and for their manufacturers. As an EU regulation, it applies directly in all member states.

Regulation (EU) 2024/2847 entered into force on 10 December 2024 and applies from 11 December 2027. Two parts apply earlier: the rules on conformity assessment bodies (from 11 June 2026) and the reporting obligations for vulnerabilities and incidents (Article 14, from 11 September 2026). It does not apply to products covered by the acts listed in Article 2: medical and in vitro diagnostic devices, vehicles covered by Regulation (EU) 2019/2144, products certified under the aviation rules (Regulation (EU) 2018/1139) and marine equipment.

The regulation imposes obligations on manufacturers throughout the product lifecycle: from the design phase (security by design), through placing on the market (conformity assessment, CE marking), to the support period, during which the manufacturer handles vulnerabilities and provides security updates. The support period is at least five years, and shorter only when the product is expected to be in use for less time. Importers and distributors also have obligations (Articles 19-21).

The manufacturer reports actively exploited vulnerabilities and severe incidents simultaneously to the CSIRT designated as coordinator and to ENISA, through the single reporting platform. An early warning is due within 24 hours of becoming aware, a notification within 72 hours, and a final report no later than 14 days after a corrective or mitigating measure is available for a vulnerability, or within one month of the notification for an incident.

CRA distinguishes four groups of products, which determine how conformity is assessed:

  • Default products (most products): the manufacturer may assess conformity itself (internal control, module A).
  • Important products, class I (Annex III), for example operating systems, routers, modems and switches, browsers, password managers, products with VPN functionality, SIEM systems and network management systems: self-assessment is possible only where the manufacturer has fully applied harmonised standards, common specifications or a European certification scheme at assurance level “substantial” or higher; otherwise a notified body must be involved.
  • Important products, class II (Annex III), namely hypervisors and container runtime systems, firewalls, intrusion detection and prevention systems, and tamper-resistant microprocessors and microcontrollers: always an assessment involving a notified body, or a European certificate at assurance level “substantial” or higher.
  • Critical products (Annex IV), namely hardware devices with security boxes, smart meter gateways and other devices for advanced security purposes, and smartcards and secure elements: a European cybersecurity certificate where the Commission requires one, otherwise the procedure for class II.

Why does it matter?

Companies that develop software or devices with digital components take on new obligations. They prepare security documentation and, throughout the support period, handle vulnerabilities and provide security updates. Some products go through a conformity assessment involving a notified body.

Article 2 does not exclude industrial products. From 11 December 2027, manufacturers of controllers, sensors and industrial software with a data connection to a device or network must meet the essential cybersecurity requirements of Annex I, like manufacturers of other products with digital elements.

Need help in this area?

Our experts will help you assess the risk and plan next steps.

Talk to an expert
Book a call